UNION CARBIDE CORPORATION -- POLYPROPYLENE GLYCOL 2025  -- 6810-00N010317
<pre>=====================  Product Identification  =====================

Product ID:POLYPROPYLENE GLYCOL 2025
MSDS Date:11/10/1987
FSC:6810
NIIN:00N010317
=== Responsible Party ===
Company Name:UNION CARBIDE CORPORATION
Address:39 OLD RIDGEBURY ROAD
City:DANBURY
State:CT
ZIP:06817-0001
Info Phone Num:914-789-2635
Emergency Phone Num:914-789-2635
Preparer's Name:RUSSELL P HILL
CAGE:61637
=== Contractor Identification ===
Company Name:UNION CARBIDE CORP
Address:39 OLD RIDGEBURY ROAD
Box:City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Phone:800-822-4357/732-563-5522 (MSDS)
CAGE:61637

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYPROPYLENE GLYCOL 2025 (POLYALKYLENE OXIDE POLYOL)
CAS:25322-69-4
RTECS #:TR6200000
Fraction by Wt: 100%
Other REC Limits:N/K 
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
    OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:MAY CAUSE MINIMAL IRRITATION SEEN AS
    EXCESS REDNESS OF THE CONJUNCTIVA.SKIN:NO EVIDENCE OF ADVERSE
    EFFECTS FROM AVAILABLE INFORMATION.INGESTION:SLIGHLY TOXIC.MAY
    CAUSE NAUSEA.INHALATION:NO EVIDEN CE OF ADVERSE EFFECTS FROM
    AVAILABLE INFORMATION.
Medical Cond Aggravated by Exposure:AVAILABLE INFORMATION SUGGESTS THAT
    OVEREXPOSURE IS UNLIKELY TO AGGRAVATE EXISTING MEDICAL CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH EYES WITH WATER THOROUGHLY AND CONTINUOUSLY FOR AT
    LEAST 15 MIN.SKIN:WASH SKIN WITH SOAP AND WATER.INGESTION:DRINK 2
    GLASSES OF WATER,INDUCE VOMITING IF THE PATIENT IS
    CONSCIOUS.INHALATION: REMOVE TO FRESH AIR.NOTE TO PHYSICIAN:THERE
    IS NO SPECIFIC ANTIDOTE.TREATMENT SHOULD BE DIRECTED AT THE CONTROL
    OF SYMPTOMS AND THE CLINICAL CONDITION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:341F,172C
Lower Limits:N/K,NONVOLAT
Upper Limits:N/K,NONVOLAT
Extinguishing Media:APPLY ALCOHOL-TYPE OR ALL-PURPOSE FOAMS IAW MFR REC
    FOR LARGE FIRES.USE CO*2 OR DRY CHEMICAL MEDIA FOR SMALL FIRES.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA/FULL PROT EQUIP
    .DO NOT DIRECT SOLID STREAM OF WATER/FOAM INTO HOT,BURNING
    POOLS;THIS MAY CAUSE FROTHING/INCR FIRE INTENSITY.
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:BURNING
    CAN PRODUCE OXIDES OF CARBON AND NITROGEN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORB MATERIALS WITH ANY COMMERCIAL
    ABSORBANT.DIKE LARGE SPILLS AND PLACE MATERIALS IN SALVAGE
    CONTAINERS.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY.
Other Precautions:NONE

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .NOT REQUIRED IN NORMAL USE.
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
    CONCENTRATION BELOW LEVEL OF CONCERN .
Protective Gloves:WEAR PVC-COATED GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH AND SAFETY SHOWER.
Work Hygienic Practices:N/K 
Supplemental Safety and Health
FREEZING POINT:SETS TO GLASS <-13F,-25C.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:<30 MMHG
Vapor Density:>1 (AIR=1)
Spec Gravity:1.005 (WATER=1)
Evaporation Rate &amp; Reference:NIL
Solubility in Water:0.01%
Appearance and Odor:CLEAR,VISCOUS LIQUID WITH MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:HEATING IN PRESENCE OF AIR (OXYGEN) TO
    TEMPS ABOVE 212F,100C MAY RESULT IN THE FORMATION OF ALDEHYDES.
Hazardous Decomposition Products:BURNING CAN PRODUCE OXIDES OF CARBON
    AND NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN A FURNACE WHERE PERMITTED UNDER
    APPROPRIATE FEDERAL,STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.