BERNZOMATIC CORP -- MAPP GAS  -- 6830-00D020183
<pre>=====================  Product Identification  =====================

Product ID:MAPP GAS
MSDS Date:05/30/1990
FSC:6830
NIIN:00D020183
=== Responsible Party ===
Company Name:BERNZOMATIC CORP
Address:ONE BERNZOMATIC DRIVE
City:MEDINA
State:NY
ZIP:14103-1648
Country:US
Info Phone Num:716-798-4949
Emergency Phone Num:716-798-4949
CAGE:70785
=== Contractor Identification ===
Company Name:BALKAMP INC
Address:2601 S HOLT ROAD
Box:City:INDIANAPOLIS
State:IN
ZIP:46241
Country:US
Phone:317-244-7241
CAGE:70842
Company Name:BERNZOMATIC CORP
Address:ONE BERNZ O MATIC DRIVE
Box:City:MEDINA
State:NY
ZIP:14103-1648
Country:US
Phone:716-798-4949
CAGE:70785
Company Name:NAPA, A DIVISION OF LINCOLN AUTOMOTIVE
Address:ONE LINCOLN WAY
Box:City:ST. LOUIS
State:MO
ZIP:63120-1578
Country:US
Phone:414-255-5520
CAGE:050Q3

=============  Composition/Information on Ingredients  =============

Ingred Name:METHYL ACETYLENE (PROPYNE)
CAS:74-99-7
RTECS #:UK4250000
Fraction by Wt: 100%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9394

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ASPHYXIANT. MAY REDUCE OXYGEN REQUIRED
    FOR BREATHING. LIQUID GAS MAY FREEZE SKIN.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
    CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
    CARCINOGENS.
Effects of Overexposure:DIZZINESS TO UNCONSCIOUSNESS IF HIGH
    CONCENTRATIUONS OF GAS REPLACE OXYGEN FOR BREATHING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:REMOVE EXPOSED PERSON TO FRESH AIR. UF UNCONSCIOUS, SEEK
    MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:-99F,-73C
Lower Limits:3.0
Upper Limits:11.0
Extinguishing Media:ELIMINATE OXYGEN SOURCE OR STOP FLOW OF GAS. USE
    WATER TO COOL CYLINDER. DRY CHEMICAL OR CARBON DIOXIDE TO REDUCE
    OXYGEN
Fire Fighting Procedures:COOL CYLINDERS WITH WATER. KEEP PERSONNEL
    AWAY.
Unusual Fire/Explosion Hazard:VAPOR IS FLAMMABLE AND HEAVIER THAN AIR
    AND MAY TRAVEL TO SOURCE OF IGNITION AND FLASHBACK.  USE WATER TO
    KEEP FIRE EXPOSED CONTAINERS COOL TO REDUCE PRESSURE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES AND VENTILATE AREA.
Neutralizing Agent:NO INFORMATION GIVEN BY MFR ON MSDS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN WELL VENTILATED AREA AWAY ROM
    ALL IGNITION SOURCES. STORE AT TEMPERATURES BELOW 125F. STORE OUT
    OF DIRECT SUNLIGHT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED WITH NORMAL USE.
Ventilation:LOCAL EXHAUST ADVISABLE WHEN WELDING, OTHERWISE "N/A".
Protective Gloves:ADVISABLE WHEN WELDING.
Eye Protection:FILTER SHADE #4 OR DARKER FOR WELDING
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
    BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:G2
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:-36F,-38C
Melt/Freeze Pt:M.P/F.P Text:NOT GIVEN
Decomp Temp:Decomp Text:NOT GIVEN
Vapor Pres:109 PSIG
Vapor Density:1.48
Spec Gravity:.571
Evaporation Rate &amp; Reference:NOT GIVEN
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS, UNPLEASANT ODOR AT APPROX. 100 PPM

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
EXTREMELY FLAMMABLE. AVOID UNCONTROLLED CONTACT WITH OXIDIZERSS
Stability Condition to Avoid:DO NOT EXPOSE TO TEMPERATURES ABOVE 125F.
Hazardous Decomposition Products:NORMAL BY-PRODUCTS OF COMBUSTION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:VENT TO ATMOSPHERE IN OUTDOOR AREA FREE OF ALL
    SOURCES OF IGNITION.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.